EvoApproxLib^LITE

/***
* This code is a part of EvoApproxLib library (ehw.fit.vutbr.cz/approxlib) distributed under The MIT License.
* When used, please cite the following article(s): V. MRAZEK. Optimization of BDD-based Approximation Error Metrics Calculations. In: IEEE Computer Society Annual Symposium on VLSI (ISVLSI '22). Paphos: Institute of Electrical and Electronics Engineers, 2022, pp. 86-91. ISBN 978-1-6654-6605-9. 
* This file contains a circuit from a sub-set of pareto optimal circuits with respect to the pwr and ep parameters
***/
// MAE% = 3.20 %
// MAE = 16 
// WCE% = 19.34 %
// WCE = 99 
// WCRE% = 1000.00 %
// EP% = 89.23 %
// MRE% = 7.47 %
// MSE = 745 
// PDK45_PWR = 0.0092 mW
// PDK45_AREA = 35.2 um2
// PDK45_DELAY = 0.17 ns
#include <stdint.h>
#include <stdlib.h>

uint64_t add8u_0PL(uint64_t a, uint64_t b) {
  int wa[8];
  int wb[8];
  uint64_t y = 0;
  wa[0] = (a >> 0) & 0x01;
  wb[0] = (b >> 0) & 0x01;
  wa[1] = (a >> 1) & 0x01;
  wb[1] = (b >> 1) & 0x01;
  wa[2] = (a >> 2) & 0x01;
  wb[2] = (b >> 2) & 0x01;
  wa[3] = (a >> 3) & 0x01;
  wb[3] = (b >> 3) & 0x01;
  wa[4] = (a >> 4) & 0x01;
  wb[4] = (b >> 4) & 0x01;
  wa[5] = (a >> 5) & 0x01;
  wb[5] = (b >> 5) & 0x01;
  wa[6] = (a >> 6) & 0x01;
  wb[6] = (b >> 6) & 0x01;
  wa[7] = (a >> 7) & 0x01;
  wb[7] = (b >> 7) & 0x01;
  int sig_21 = wa[2] ^ wb[2];
  int sig_22 = wa[4] | wb[4];
  int sig_23 = wa[0] | wb[0];
  int sig_35 = ~((int)0);
  int sig_37 = wa[5] ^ wb[5];
  int sig_39 = wa[5] & wb[5];
  int sig_42 = sig_39;
  int sig_43 = wa[6] ^ wb[6];
  int sig_44 = wa[6] & wb[6];
  int sig_46 = sig_43 | sig_42;
  int sig_47 = sig_44;
  int sig_48 = wa[7] ^ wb[7];
  int sig_49 = wa[7] & wb[7];
  int sig_50 = sig_48 & sig_47;
  int sig_51 = sig_48 ^ sig_47;
  int sig_52 = sig_49 | sig_50;
  y |=  (sig_23 & 0x01) << 0; // default output
  y |=  (sig_35 & 0x01) << 1; // default output
  y |=  (sig_21 & 0x01) << 2; // default output
  y |=  (sig_35 & 0x01) << 3; // default output
  y |=  (sig_22 & 0x01) << 4; // default output
  y |=  (sig_37 & 0x01) << 5; // default output
  y |=  (sig_46 & 0x01) << 6; // default output
  y |=  (sig_51 & 0x01) << 7; // default output
  y |=  (sig_52 & 0x01) << 8; // default output
   return y;
}